Skip to content

Cubic Yard Calculator

Convert length, width, and depth into cubic yards for bulk material planning.

Use this free cubic yard calculator to estimate bulk material volume from length and width in feet, or a known area in square feet, plus depth in inches. You get cubic yards and cubic feet; an optional price per cubic yard adds a material cost estimate. Use the volume as a starting point for a supplier quote.

Choose an input method

What Can You Use This Calculator For?

Use this yardage calculator to estimate a mulch layer in a rectangular bed, topsoil to fill a measured space, gravel for a planned base layer, or sand spread over a known area. It calculates the geometric volume of the space you measure. The amount you need to order may vary with the material and installation requirements.

A general volume calculator for cubic yards does not select a suitable layer thickness, concrete mix, or structural design. Material-specific tools can help with the next step, such as bag quantities or weight estimates. Choose the depth from your project plan or product guidance; the calculator does not determine load capacity or building code requirements.

How to Measure Your Project

  1. Measure the footprint. For a rectangle, measure length and width in feet and choose Length × Width × Depth. If you already know the area, choose Area × Depth and enter square feet.
  2. Measure the depth. Enter the planned fill depth or layer thickness in inches. Check several points. If the depth varies significantly, divide the space into sections with similar depths. Calculate each section separately, then add the volumes.
  3. Match the field units. Length and width use feet, area uses square feet, and depth uses inches. Convert other measurements before entering them; there is no unit selector.
  4. Split irregular spaces. Divide an L-shaped footprint into non-overlapping rectangles. For another shape, work out its area separately and use Area × Depth. Section totals must be added by you; this cubic yardage estimator does not combine them automatically.
  5. Calculate. Optionally enter a price per cubic yard, then select Calculate. Record the volume before planning the order.

To check the cu yd calculator result by hand, use length × width × (depth ÷ 12) ÷ 27, or area × (depth ÷ 12) ÷ 27. These formulas require feet, square feet, and inches as labeled above. Cu yd and yd³ both mean cubic yards: one cubic yard is a cube 3 feet on each side, equal to 27 cubic feet.

Understand Your Result Before Ordering

Treat the cubic yard estimator result as the geometric volume of the space you measured. The display rounds volume for readability; it does not add extra material or round up to a supplier’s selling increment. If the displayed result is close to a supplier’s order increment, confirm the quantity before ordering rather than rounding it down.

  • Installation allowance: discuss handling losses or uneven placement with the supplier. There is no single extra percentage that fits every material and project.
  • Compaction or settling: confirm whether your dimensions describe finished material and how much loose material is needed to achieve it. This is a material-specific adjustment, separate from waste.
  • Order quantity: after any agreed adjustments, round up separately to the supplier’s increment and check the delivery minimum. The tool does not perform this step.

A yard volume calculator measures volume, not area or weight. Square feet describe the footprint and are not enough without depth. To convert cubic yards to tons, you need the specific material’s bulk density in the condition being supplied; moisture and packing can change it. Ask for a supplier-confirmed density and clarify whether the quote uses U.S. short tons or metric tonnes.

Coverage of 1 Cubic Yard

For a uniform layer, ideal coverage in square feet equals 324 ÷ depth in inches.

DepthCoverage from 1 cubic yard
1 inch324 sq ft
2 inches162 sq ft
3 inches108 sq ft
4 inches81 sq ft
6 inches54 sq ft
12 inches27 sq ft

Use Cubic Yards to Plan Your Material Budget

Material cost = order volume × price per cubic yard. The optional price field calculates cost using the geometric volume, before order adjustments. Once you decide on an order quantity, multiply that quantity by the quoted rate separately.

Example: a 12 × 9 ft area at 3 in deep has a volume of 12 × 9 × (3 ÷ 12) = 27 ft³, or 1 yd³. Suppose you choose a 10% allowance: 1 × 1.10 = 1.10 yd³. If the supplier sells in 0.25 yd³ increments, round up to 1.25 yd³. At an assumed $60/yd³, material costs 1.25 × $60 = $75. With those dimensions and a $60 price, the calculator itself shows $60 for the unadjusted 1 yd³.

The price and selling increment are hypothetical. The 10% allowance is an example assumption, not a general recommendation. Delivery, minimum order charges, taxes, labor, and site preparation may cost extra; $75 is the example material subtotal, not the full project cost.

Avoid Common Ordering Mistakes

  • Keep inches and feet straight, especially in the depth field.
  • Use depth with area; square footage alone is not an order volume.
  • Check depth at several points instead of relying on one shallow spot.
  • Confirm whether the supplier sells by cubic yard, ton, bag, or another unit.
  • Ask about selling increments and the minimum volume for delivery.
  • Compare delivered quotes, including fees, rather than material rates alone.
  • Clarify whether the quantity describes loose material or the finished compacted layer.

These checks help reduce the risk of excess material or a second delivery. If a quote differs from your estimate, compare measurements, material conditions, allowances, and included services before drawing conclusions.

Choose the Right Calculator for Your Next Step

  • Concrete Slab Calculator: use it for slab-specific quantities once the slab dimensions and thickness are established.
  • Gravel Calculator: use it when gravel weight and supplier order units matter in addition to volume.
  • Soil Calculator: use it to plan topsoil quantities and compare bulk and bagged purchasing.
  • Mulch Calculator: use it for mulch beds and bulk-versus-bag quantities.

Frequently Asked Questions

What measurements does the online cubic yard calculator need?

Enter length and width in feet plus depth in inches, or enter an existing area in square feet plus depth in inches. Price per cubic yard is optional.

How many cubic feet are in a cubic yard?

Exactly 27. One yard is 3 feet, so a cubic yard contains 3 × 3 × 3 cubic feet. The calculator shows both volume units.

Can I calculate cubic yards from square feet?

Yes, if you also know the depth. Choose Area × Depth, enter square feet and inches, then calculate. Area alone cannot determine volume.

How do I calculate an irregular area?

Calculate separate, non-overlapping rectangles and add the volumes outside the tool. Alternatively, work out the total area first and use Area × Depth if the depth is uniform.

Should I add extra material before ordering?

Ask the supplier what your material and installation require. No allowance is included automatically; handling loss and the change from loose to compacted material need separate consideration.

Should I round the result when ordering?

After deciding on any adjustments, round up to the supplier’s selling increment and check its minimum order. Display rounding in this tool does not set an order quantity.

Can I use cubic yards to estimate material cost?

Yes. Enter a price per cubic yard for the measured volume’s cost. For a final material subtotal, multiply your adjusted order volume by the supplier’s rate separately, then account for delivery and other charges.

Can I convert cubic yards to tons?

Only with a suitable bulk density. Multiply cubic yards by the supplier’s tons-per-cubic-yard figure, using the same material condition and ton unit. This calculator does not estimate weight.

What do cu yd, yd³, and yd3 mean?

All three refer to cubic yards. Cu yd is an abbreviation, yd³ uses a superscript 3 for volume, and yd3 is a plain-text way to write yd³.