Your mulch estimate
How much mulch do I need?
You need the area to cover and the depth you plan to add. This mulch estimator combines up to 10 beds with different depths, then shows the volume and purchase quantities. Prices are optional.
Measure the area
- Choose Rectangle and enter length and width in feet. For a circular bed, choose Circle and enter its diameter.
- For an irregular bed, divide the footprint into nonoverlapping rectangles or circles. Exclude paths, openings, and ground you will leave uncovered.
- Already measured the bed? Choose I know the area and enter square feet. Add another area for each section that needs a different depth.
For more complex outlines, work out the area with the Square Footage Calculator, then bring the total here. Enter decimal feet: 10 ft 6 in = 10.5 ft. The form calculates square footage for its supported shapes; it does not measure a bed from a map or photo.
Choose the depth to add
Add a new layer uses your entered depth in inches. Top up existing mulch subtracts the Existing average depth from the Target total depth. Check the current layer in several places. If it already meets the target, that section contributes zero added volume.
The mulch depth calculation uses your chosen measurements; it does not select an optimal thickness. The right layer depends on the material, planting, and existing cover. Keep material clear of tree trunks and plant bases. This estimate does not model decomposition or compaction.
Read cubic feet and cubic yards
The calculator reports mulch volume in both units: cubic feet = area in ft² × added depth in inches ÷ 12; cubic yards = cubic feet ÷ 27. One cubic yard contains 27 cubic feet. Use the Cubic Yard Calculator for general volume conversions.
For a bulk purchase, use cubic yards and select the Supplier order increment. Steps of 0.25, 0.5, or 1 cu yd round the order upward; Exact quantity keeps the calculated volume. The optional Extra mulch percentage adds an allowance before purchase rounding. At 0%, no extra percentage is added. Results separate the required quantity from rounding surplus, and purchasing calculations use unrounded values.
How many bags of mulch do I need?
The mulch bag calculator divides the required cubic feet by the volume on your package label, then rounds up to a whole bag. Select 2 cu ft, 3 cu ft, or Custom volume to match the product. For example, one cubic yard needs 14 two-cubic-foot bags, but only 9 three-cubic-foot bags. Check the purchased volume and surplus before ordering.
Example: a 120-square-foot bed
For a 10 × 12 ft bed, enter 3 inches of added depth and 0% extra. The depth is an arithmetic example, not a planting recommendation.
| Result | Amount |
|---|---|
| Area | 10 × 12 = 120 ft² |
| Required volume | 120 × 3 ÷ 12 = 30 ft³ |
| Cubic yards | 30 ÷ 27 ≈ 1.11 yd³ |
| 2-ft³ bags | 30 ÷ 2 = 15 bags |
| Bulk order at a 0.25-yd³ increment | 1.25 yd³; 3.75 ft³ rounding surplus |
Compare bagged and bulk costs
Open Compare bagged vs bulk cost to use the optional mulch cost calculator. Enter your price per bag, bulk price per cubic yard, and delivery or pickup fees for each order. Material cost uses whole bags or the rounded bulk order; fees are added once per purchase.
Using the example above and hypothetical prices: 15 bags at $4 cost $60 for material. With $0 fees, the total is $60. Bulk at $35 per cubic yard costs $43.75 for 1.25 yd³; with $25 delivery, the total is $68.75. Bags cost $8.75 less with these quotes, despite the lower bulk material price.
Calculate purchase cost using your quoted mulch prices, not an assumed national average. Taxes, labor, discounts, and unentered charges are not added automatically. Price differences do not compare product quality.
Before you buy
- Confirm the product, package volume, and depth you intend to add over the existing layer.
- Check current prices, delivery access, fees, minimum orders, and supplier rounding increments. No minimum order is applied by this tool.
- Review the rounding surplus before adding another allowance. The result assumes a uniform layer, not guaranteed coverage after settling.
Planning a stone layer instead? The Gravel Calculator supports gravel volume and weight estimates using a bulk density.
Frequently asked questions
Does this work as a mulch coverage calculator?
It estimates material needed for a measured area at your chosen depth. It does not accept a fixed supply of bags or cubic yards and calculate the area that supply will cover.
Why is the cost total missing?
Blank prices or fees mean unknown. Enter both a material price and fees for a combined total; use 0 for free delivery. Comparing complete totals requires both prices and both fees.
Can I combine different products?
One calculation uses a shared bag size and price for all beds. Run separate estimates for different products so their quantities and costs stay meaningful.
Can I use a bag labeled only in pounds?
Find its volume in cubic feet or ask the supplier. Weight alone cannot determine volume without product density; this form does not calculate weight.
Will my measurements be saved?
This calculator plugin runs in your browser and does not store or transmit the measurements you enter. Keep your own record before resetting or leaving the page.
