Concrete estimate
Your results
- Measured volume
- 0 cu yd0 cu ft
- Estimated order amount
- 0 cu yd
Approximate bags
060 lb bags
080 lb bags
Bag counts use approximate yields of 0.45 cu ft for a 60 lb bag and 0.60 cu ft for an 80 lb bag. Check the yield printed on the specific product package before buying.
Enter dimensions for your pour
This free concrete calculator handles one rectangle or a group of identical cylindrical holes at a time. Choose your shape, enter dimensions in the units beside each field, set any extra allowance, and select Calculate. Start with 0% extra to check dimensions alone.
- Rectangular pour: measure inside the forms. Enter length and width in feet, and thickness from prepared base to finished surface in inches. Use the depth specified for your project; this tool does not choose a suitable thickness.
- Round post holes: enter the full inside diameter and depth in inches, plus a whole number of holes. Diameter runs across the opening through its center; it is twice the radius. All holes in one calculation must have matching dimensions.
- Decimal entries: 10 ft 6 in becomes 10.5 ft; 4½ in becomes 4.5 in. Enter numbers without unit symbols or fractions. No metric input switch is available: convert measurements before entering them.
Read the volume and allowance separately
A concrete volume calculator measures space to fill, rather than surface area or dry material weight. Measured volume comes directly from your dimensions. Results show cubic feet (cu ft) and cubic yards (cu yd). One yard is 3 feet long, so one cubic yard is 3 × 3 × 3 = 27 cubic feet.
For a rectangle, cu ft = length in feet × width in feet × thickness in inches ÷ 12. For round holes, cu ft = π × (diameter in inches ÷ 24)² × depth in inches ÷ 12 × hole count. Dividing diameter by 24 converts it to its radius in feet. Divide either result by 27 to obtain cu yd.
When using this as a concrete yard calculator, read Estimated order amount for volume after your allowance: measured volume × (1 + extra percentage ÷ 100). At 0%, both amounts match. Choose any allowance based on excavation, form accuracy, placement conditions, and advice from your supplier. No percentage suits every site.
Displayed volumes are rounded for readability; bag counts use unrounded values. An order result is not rounded to your supplier’s delivery increment. Confirm an accepted quantity before purchasing.
Worked example: 10 ft × 12 ft × 4 in
Check this cubic yard concrete calculator with a rectangular pad measuring 10 ft by 12 ft and 4 in deep. These are example dimensions, not a thickness recommendation.
- Measured volume: 10 × 12 × (4 ÷ 12) = 40 cu ft, or 40 ÷ 27 ≈ 1.48 cu yd.
- With an example 5% allowance: 40 × 1.05 = 42 cu ft, or approximately 1.56 cu yd.
- Using the reference yields below, 42 ÷ 0.45 rounds up to 94 bags at 60 lb; 42 ÷ 0.60 gives 70 bags at 80 lb. These are alternative purchases, not quantities to combine.
Combine sections without counting space twice
For an L-shaped walkway, sketch rectangles that meet without overlapping. Calculate each section at its own thickness and record its measured volume before changing inputs. For holes with different sizes, calculate each matching group separately. This concrete quantity calculator does not save sections or add them automatically.
Add volumes in one unit, then apply your chosen allowance once. If you instead total order amounts that already include extra, do not add that percentage again. For one bagged product used across all sections, combine target volumes before rounding up to whole packages; summing separately rounded bag counts can overstate a shared purchase.
Choose ready-mix delivery or bagged material
Use this concrete estimator to prepare quantities for discussion with a supplier. NRMCA’s ordering guide describes fresh-volume sales and project-specific ordering information. Share your calculated amount and project specifications; confirm mix requirements, delivery access, scheduling, minimum charges, and order increments directly. This form does not calculate prices or truckloads.
Approximate bags uses the amount including extra, divided by a fixed yield, rounded up to a whole bag. Reference yields come from QUIKRETE Concrete Mix No. 1101: about 0.45 cu ft per 60 lb bag or 0.60 cu ft per 80 lb bag. Check your exact package; equal dry weights do not guarantee equal output across products.
For other package yields, product comparison, or bag pricing, use the Concrete Bag Calculator. Enter your combined volume there and leave its allowance at 0% if extra is already included. For a rectangular project with known area, supplier order increments, or a budget, use the Concrete Slab Calculator.
Frequently asked questions
Does the hole estimate subtract a post?
No. It includes the entire cylinder. Posts, gravel at the bottom, or other objects reduce available space, but this form has no displacement input. Irregular excavations also differ from a perfect cylinder; measure actual conditions before ordering.
Can I use this concrete estimator calculator for a delivery quote?
Use its quantity when requesting a quote, but obtain pricing and delivery terms from your supplier. The result does not specify strength, reinforcement, cement-to-aggregate proportions, or water requirements. Those decisions depend on project specifications and the chosen mix.
Can I estimate a slope or a thickened edge?
A single rectangle assumes uniform thickness. Separate a thickened edge into additional nonoverlapping volumes, or calculate only its added depth if the main section already includes that footprint. A slope or irregular shape needs suitable geometry; entering its maximum depth as a uniform value can overestimate the amount.
