Skip to content

Concrete Bag Calculator

Use the concrete bag calculator to estimate whole packages from volume or slab dimensions, check rounding surplus, and compare costs using your own prices.

Plan your concrete bag purchase.

Concrete quantity

Already included extra concrete in your volume? Leave Extra concrete at 0% to avoid adding it twice. Changing units converts your entered volume.

Optional allowance for uneven ground or spillage.
Primary product

Standard yields are approximate and apply to QUIKRETE Concrete Mix No. 1101. Other mixes may differ.

Leave blank if unknown. Enter 0 for a known zero price.
Compare another product

Costs cover bags only. Delivery, taxes, tools, and labor are not added.

Use this concrete mix bag calculator to turn a known volume or rectangular pour into a shopping quantity. Here, premixed concrete means a dry blend containing cement and aggregates that needs water, rather than wet material delivered by truck.

Enter your measurements and product details

  1. Choose I know the volume for cubic feet or cubic yards. Changing units converts a valid entry. For a rectangle with constant thickness, choose Calculate from slab dimensions: length and width use feet; thickness uses inches. Enter decimal feet, so 10 ft 6 in becomes 10.5 ft.
  2. Set Extra concrete for any allowance you choose. Leave it at 0% if the entered volume already includes extra material. Select the 60 or 80 lb preset, or Custom product for a different documented yield in cubic feet. A custom name and dry weight are optional.
  3. Enter your unit price if known. To compare two products, open Compare another product and enable comparison. Enter each product’s details, then select Calculate. Both purchases cover the same target volume; a cost comparison requires both prices.

Changing an input clears the previous result. Reset restores known-volume mode, the 80 lb preset, 0% extra, and comparison off. For round post holes, find the volume with the Concrete Calculator. For several sections, add their measured volumes yourself and enter the total here.

Choose the yield printed on the package

Yield describes the volume produced after preparation; dry weight describes what you carry home. The presets use QUIKRETE No. 1101. The table below adds two other package sizes from its official technical data sheet. These approximate values apply to this product, not every formulation of the same weight.

QUIKRETE No. 1101: approximate output and quantities for 1 cubic yard (27 cu ft), with no allowance
Dry weightOutput (cu ft)Whole packages
40 lb0.3090
50 lb0.37572
60 lb0.4560
80 lb0.6045

For 40 or 50 lb sizes, use Custom product with the corresponding output. For any other brand, specialty formulation, or package size, check its own label. This premixed concrete calculator uses the yield you select; it cannot verify the product on a store shelf.

Example: a 10 × 12 ft pour

At an illustrative thickness of 4 in, the measured volume is 10 × 12 × 4 ÷ 12 = 40 cu ft. A chosen 5% allowance increases the target to 40 × 1.05 = 42 cu ft, approximately 1.5556 cu yd. These dimensions and this percentage explain the arithmetic; they are not design recommendations.

Purchases for a 42 cu ft target using the documented approximate yields
Purchase detail60 lb option80 lb option
Output per package0.45 cu ft0.60 cu ft
Before rounding42 ÷ 0.45 = 93⅓42 ÷ 0.60 = 70
Quantity to buy9470
Total output42.3 cu ft42 cu ft
Rounding surplus0.3 cu ft0 cu ft
Total dry weight5,640 lb5,600 lb

The concrete bag estimator divides the target by the selected yield and rounds upward once, after applying your allowance. It retains the underlying precision rather than using rounded display values. In this example, the allowance adds 2 cu ft before counting; rounding adds a separate 0.3 cu ft for the 60 lb option.

To estimate the material subtotal, multiply the whole purchase quantity by your actual unit price: 94 × your 60 lb price or 70 × your 80 lb price. Comparing full totals is more useful than comparing individual price tags. A blank price stays unknown; an entered 0 means a known zero price. Delivery, taxes, tools, and labor are excluded.

Check the measurements before shopping

Measure the planned filled space, including its depth. Where the base varies, take several readings and split the project into sections with similar thicknesses. Work out each section separately and add their volumes. Include thickened edges and footings separately, then use the total as a known-volume entry.

Choose any additional allowance to reflect measurement uncertainty, uneven ground, and placement losses. NRMCA’s guidance on yield discrepancies explains how irregular subgrade and changes in dimensions affect quantities. There is no mandatory percentage in this tool. Rounding surplus alone may be too small to cover those losses; at 0%, the only extra output comes from buying whole packages. Avoid adding the same allowance twice.

Use the Concrete Slab Calculator for broader slab quantities and budgeting, or the Cubic Yard Calculator for general volume estimates. This page focuses on the purchase count. It does not select structural thickness, reinforcement, or strength. The displayed dry weight is a purchase total; check your vehicle’s carrying limits separately.

Match the material to the job

A pre-mixed concrete bags calculator needs the output of a complete dry blend. Cement alone is a binder, not a substitute for a product containing the necessary aggregates. Do not enter a cement sack’s weight as though it were the volume of a prepared batch.

When considering truck delivery, compare local quotes, minimum quantities, delivery fees, site access, and the time and equipment available for mixing and placing. The best choice depends on those conditions. This tool compares packaged products using your prices; it does not quote delivered material or determine a universal break-even project size.

Frequently asked questions

How many bags of concrete do I need?

Divide your required cubic feet, including any chosen allowance, by the specific product’s yield per bag. Round upward because bags are purchased whole.

Does every 80 lb bag yield 0.60 cu ft?

No. That approximate preset belongs to QUIKRETE Concrete Mix No. 1101. Use Custom when your product’s documented yield differs.

Should I always add the same extra percentage?

No single percentage fits every pour. Choose an allowance for your conditions. The default is 0%, with no hidden addition.

Are larger bags always cheaper?

No. Yield, whole-bag rounding, and your actual prices determine the purchase cost. Enter both prices to compare the totals.

Can I compare two custom products?

Yes. Choose Custom for each option and enter each product’s yield independently. Both use the same required concrete volume.

Why is there extra mix with no allowance?

A fractional bag requirement rounds upward. The resulting surplus comes from buying whole bags, even when you add no percentage allowance.