Skip to content

Asphalt Calculator

Use this asphalt estimator to plan a hot mix order for a path or paved area. Enter the length and width or a known area, then add the finished thickness and the density of your supplier’s mix.

Measure the area
Ask your supplier for the density of the mix you plan to order.
Enter 0 to order without an allowance.
Leave blank to skip cost. Enter 0 if the mix is free.

How to Use the Asphalt Paving Calculator

  1. Choose Length × Width for a rectangle and enter both measurements in feet. Choose Known Area if you already have the total in square feet.
  2. Enter the planned thickness in inches after rolling and compaction. The asphalt material calculator estimates the volume of the finished layer, so the loose depth before rolling would overstate the amount.
  3. Enter the density of the compacted mix in pounds per cubic foot. Ask your supplier for the value for the specific mix you plan to order.
  4. Enter an allowance for extra mix, or leave it at 0%. If you have a quote in dollars per US short ton, enter it to estimate the cost of the mix.

How to Calculate Asphalt Tonnage

Multiply the area by the compacted thickness divided by 12 to get cubic feet. Divide by 27 to express the same volume in cubic yards. Multiply the cubic feet by the mix density, then divide by 2,000 pounds per US short ton to get the weight before allowance.

The asphalt tonnage calculator multiplies that weight by 1 plus the allowance divided by 100. It then multiplies the unrounded order tonnage by the quoted price, if entered. The total excludes delivery, base material, and labor. Estimate the aggregate for the base separately with the Gravel Calculator.

Worked Example: A 30 × 12 ft Path

Try this example in the hot mix asphalt calculator: a 30 ft by 12 ft path with a 2 in compacted layer. For the math, use a test density of 145 lb/ft³, a 10% allowance, and a price of $100 per US short ton.

  1. Area: 30 × 12 = 360 sq ft.
  2. Volume: 360 × 2 ÷ 12 = 60 ft³, or about 2.222222 yd³.
  3. Weight before allowance: 60 × 145 ÷ 2,000 = 4.35 US short tons.
  4. Order: 4.35 × 1.10 = 4.785 US short tons.
  5. Mix cost: 4.785 × $100 = $478.50.

Frequently Asked Questions

Can I use the asphalt quantity calculator for an L-shaped area?

Yes. Split the outline into two rectangles that don’t overlap, calculate their areas, and add them. For an angled corner, you can use half the base times the perpendicular height of a triangle. Subtract areas you won’t pave. Enter the total under Known Area. If the design calls for different thicknesses, estimate each section separately.

Does an asphalt square footage calculator tell me how many tons to buy?

Square footage tells you the area to cover. To convert that area to tons, you also need the compacted thickness to find the volume and the compacted mix density to find its weight.

How does density affect the asphalt weight calculator?

At the same area and thickness, the tonnage changes in direct proportion to the density. If the mix is 5% denser, the estimated weight is 5% higher. Use the supplier’s density for your order rather than the test value in the example.

Does the asphalt tons calculator use US short tons?

Yes. Both weight results use US short tons of 2,000 lb. Check that your supplier’s quote uses the same unit before entering a price.

How much asphalt do I need if my supplier has a minimum order?

Start with the tonnage after allowance. The result keeps fractional tons and applies no supplier minimum or increment. Ask what quantity the supplier can sell you and confirm the quoted total before ordering.