Enter a price per board to estimate board cost. Each row starts with whole stock boards. The estimate does not carry offcuts from one row to the next, even when more than one short row could be cut from a single board. Plan any edge-board trimming, butt joint placement, and end gaps using the board manufacturer’s installation instructions. This estimate covers decking boards only.Your deck board estimate
How to Use the Deck Boards Calculator
- Measure the rectangular area you plan to cover. Enter its length and width in feet, then choose the direction the rows will run.
- Enter the actual face width in inches and the full stock length in feet. Use the manufacturer’s instructions to choose a side gap in inches.
- Set a reserve percentage and enter the supplier’s price per board if you want a cost estimate. Select Calculate, then use Download PDF to save the result.
This decking material calculator estimates what you need for the walking surface. Estimate joists, framing, fasteners, and installation separately.
How the Decking Coverage Calculator Counts Rows
The direction you choose sets the length of each row. The dimension across the rows determines how many you need.
Convert the dimension across the rows to inches. Add one side gap, then divide by the actual face width plus that gap and round up. Adding the gap to the numerator accounts for gaps only between rows. You may need to trim the outermost rows to fit.
Multiply the deck length by its width for the area, including the gaps. Multiply the row count by the length of each row for total installed length. To find the stock needed for one row, divide its length by the stock length and round up. A row that fits on one board uses one. Longer runs need two or more pieces joined end to end.
Using the Decking Cost Calculator
Multiply the number of stock boards needed per row by the number of rows. Add your reserve to that base count, then round up to get the purchase quantity. Multiply it by the unit price you entered to estimate cost. Leave the price blank to skip the estimate or enter 0 to show $0.00. Tax, delivery, and labor are separate.
Worked Example for a 16 × 10 ft Deck
For a deck that’s 16 ft long and 10 ft wide, enter a stock length of 12 ft, an actual width of 5.5 in, a side gap of 0.125 in, a reserve of 10%, and a price of $18.50 per board. Both directions cover 160 sq ft. Compare the two layouts in the decking board estimator.
Rows Running Along the 16 ft Length
The 10 ft cross dimension is 120 in. Divide 120.125 by 5.625 and round up to 22 rows. Each 16 ft row needs two 12 ft boards, for 44 before reserve and 352 linear ft installed. With 10% extra, round 48.4 up to 49. At $18.50 each, the total is $906.50.
Rows Running Along the 10 ft Width
The 16 ft cross dimension is 192 in. Divide 192.125 by 5.625 and round up to 35 rows. Each 10 ft row fits on one 12 ft board. That gives 35 to buy before reserve and 350 linear ft installed. With 10% extra, round 38.5 up to 39. At $18.50 each, the total is $721.50.
Decking FAQs
Which width should I enter?
Use the actual face width of the board before adding a gap. The nominal size on the label may be wider. Check the supplier’s dimensions or measure a sample.
Can I use this as a composite decking calculator?
Yes. Use the actual width and stock length of the product you plan to install. Follow the manufacturer’s instructions for side gaps, end gaps, and butt joint placement. Only side gaps affect the row count.
Does the side gap count at the edges of the deck?
A side gap counts only where two rows meet. If the manufacturer requires clearance at an edge, subtract it before entering the deck dimensions.
Does the decking calculator reuse offcuts?
No. The estimate starts each row with fresh stock, even when an offcut from another row would fit. If you plan to reuse cuts, check that the pieces and joints work with your installation method.
Why does the estimate round up?
Suppliers sell whole boards. The estimate rounds up the stock needed for each row, then rounds up again after adding the reserve so the order includes the full allowance.
