Inputs changed. Calculate again to update this estimate.
Your paver base estimate
Full estimate for copy and print
What Can You Use the Paver Base Calculator For?
Plan material quantities from measurements you can take on site. Keep the supporting aggregate and optional bedding as separate orders, with their own thicknesses and purchasing details.
Plan a patio or garden path
For a patio quote, use the patio base calculator with your measured footprint and specified thickness. A rectangular walkway works the same way; divide a turning path or larger paved layout into sections.
Compare sizes and depths
To compare options in the patio gravel base calculator, calculate the first layout and save the estimate. Then change the area or depth and calculate the second option.
Prepare a supplier order
Before ordering, use the paver base material calculator to check the planned requirement, rounded purchase, usable stock, and surplus. Choose bulk volume, bags, or weight with a matching density, and add quoted prices to estimate costs.
How Much Paver Base Do I Need?
- Measure the length and width of each rectangle in the selected unit. Choose Add section for non-overlapping parts, or I know the area for a measured total.
- Exclude openings and ground you will not cover. For curved or complex outlines, find a net area with the Square Footage Calculator, then enter that total here.
- Enter the finished compacted thickness specified for your project. Enable bedding only if needed, and select whether its entered depth is loose/screeded or finished/compacted.
- Enter the supplier’s conversion factor, a separate allowance if needed, and the purchase method. Add density for weight, then calculate and review the material list.
Sections share the same depth for each layer. Calculate areas with different thicknesses separately. Use the paver base depth calculator to check quantities for your chosen depth; it does not select a suitable structural thickness. Follow project-specific requirements for soil, loads, climate, and drainage.
Allow for extensions beyond the paving
The supporting footprint may extend past the finished paving. Enter the specified left, right, front, and back extensions for each rectangle. With a known area, enter the measured total including extensions in Known base area; a blank field uses the paved area. Bedding uses the paved footprint unless you enter an override.
Overlapping rectangles and shared extension strips are not removed automatically. Adjust your sections or use a measured net total to avoid counting the same ground twice.
Understand the volume and weight
For US measurements, geometric volume in ft³ = area in ft² × depth in inches ÷ 12. Volume in yd³ = volume in ft³ ÷ 27. The calculations use the relevant footprint for each layer and retain unrounded values until results are displayed.
Geometric volume describes the layer at the entered depth. For a finished compacted thickness, multiply by the supplier’s loose-volume factor to estimate the delivered amount. The initial factor of 1.00 applies no conversion; it is not a material-specific recommendation. For loose/screeded bedding, the factor stays at 1.00.
Extra order allowance is a separate reserve for losses and measurement uncertainty. It is applied once after conversion. Usable loose stock is then subtracted, and the remaining purchase rounds up to the selected supplier increment or whole bags. Do not add another compaction factor to that result.
For an order by weight, enter your supplier’s loose density in the paver base gravel calculator. Estimated mass = planned loose volume × matching loose density. Moisture, grading, and material condition affect weight. US short tons mean 2,000 lb each; metric tonnes mean 1,000 kg each.
Example: a 20 × 10 ft patio
For arithmetic only, assume no extensions, a 6 in finished compacted thickness, a 1.20 loose-volume multiplier, and 5% extra allowance. These inputs are not construction recommendations.
- Area: 20 × 10 = 200 ft².
- Geometric volume: 200 × 6 ÷ 12 = 100 ft³ ≈ 3.704 yd³.
- Planned loose volume, including conversion and allowance: 100 × 1.20 × 1.05 = 126 ft³ ≈ 4.667 yd³.
- With no stock and a 0.5 yd³ order increment: buy 5 yd³, leaving about 0.333 yd³ beyond the planned requirement.
The Load example button uses these inputs and also enables a separate bedding order and hypothetical prices. Review each layer in the results; its quantity and allowance are calculated independently.
Before You Order
- Confirm the specified aggregate, finished thickness, and any required extensions with your project’s designer or installation instructions.
- Ask the supplier for the loose-volume conversion and its meaning. A factor of 1.20 means 20% extra volume; it does not mean a 20% loss of delivered volume.
- Confirm loose density for a weight quote, or package volume for bags. A pounds-only label cannot determine cubic feet without matching density.
- Check order increments, minimum loads, delivery access, and quoted units. The form rounds by your increment but does not enforce a supplier’s minimum load.
- Use Copy material list or Print estimate to retain the measurements and assumptions. Check prices, delivery, and tax with the supplier before buying.
What the estimate includes
Optional pricing uses purchased quantities after rounding. Enter prices for each order, materials-only sales tax, and delivery. An unpriced purchase produces a partial material subtotal. Excavation, spoil removal, equipment, geotextile, edging, pavers, joint material, and installation labor are excluded.
Bedding sits immediately under the paving; joint material fills the spaces between pieces. In the paver gravel base calculator, supporting aggregate and optional bedding each have their own depth, conversion, and allowance. The estimate covers these two uniform-depth layers, not drainage or permeable-system design.
For a separate aggregate project, use the Gravel Calculator. For general volume calculations, use the Cubic Yard Calculator.
Frequently asked questions
How Much Gravel Do I Need for Pavers?
Use the supporting footprint and specified compacted thickness, then convert the geometric volume into a loose order with your supplier’s factor. Add any separate allowance once. Order from the purchase quantity, which accounts for usable stock and rounding, rather than from geometry alone.
Can I calculate without knowing the density?
Yes. Volume and bag estimates work without it. Weight ordering and pricing by mass require a matching loose density; finished compacted density is unsuitable for converting a loose order.
Does the calculator estimate the paving pieces too?
No. This estimate covers the supporting aggregate and optional bedding. Use the separate Paver Calculator to estimate pieces and packs.
Can I combine leftover material with a new order?
Enter its usable loose volume under Usable material already on hand for the matching layer. Only include suitable material of the same type. If stock covers the planned requirement, no purchase is needed; excess appears as surplus.
Why is my total cost incomplete?
If a material you need to buy has no entered price, the material subtotal is incomplete. Add the missing quote to complete it. Even with all prices filled in, the total covers only the included materials and entered extras, such as delivery and materials-only tax. Installation and other excluded work need separate quotes; they do not make the material subtotal incomplete.
