Skip to content

Shower Tile Calculator

Estimate shower wall and floor tile separately, including niches, cutting allowances and whole-box orders for each product.

Use the Shower Tile Calculator for selected walls, a floor, an optional ceiling and exposed niche, bench or curb faces. Enter shower width, depth and tiled height, or give each custom surface its own dimensions or measured area. For each tile product, enter labeled box coverage or tile or sheet dimensions and packaging, then choose a cutting allowance. The results show net area, coverage with allowance and a separate whole-box or individual-piece order for each product, with optional costs from your prices.

PLAN YOUR TILE PURCHASE

Measure what you will tile. Keep separate products in separate orders.

1. Shower surfaces
In addition to the main dimension.
In addition to the main dimension.
In addition to the main dimension.

All selected walls share this tiled height; both side walls share the shower depth. Use Custom surfaces for other dimensions. The front is open; glass and the entry door add no tiled wall area.

WidthHeightDepthOpen front
Measurement guide · schematic, not to scale
Adjust covered wall / floor area

Subtract the area actually hidden by a bench, curb or another structure. No automatic deduction is made. Do not repeat an opening or accent deduction here.

Floor area is measured in plan, with no slope multiplier. For a known actual floor area, use Custom surfaces.

2. Tile products & ordering

Sample coverage values are editable planning inputs, not product recommendations. Replace them with the exact SKU's carton label. Products never merge merely because their dimensions match. Up to 20 products.

Openings, niches & accent areas

Add non-overlapping openings on an included wall. Without coordinates this tool cannot detect overlap. Window reveals and shelf faces are separate additional surfaces.

Untiled openings

Niches

Accent areas within a parent surface

An accent replaces the main tile in that area; it does not enlarge the physical surface.

Bench, curb, shelf & additional tiled faces

Enter only exposed faces that will receive tile, one row per face. Use separate rows for bench top/front/sides, curb top/sides, shelf top/underside/edge or window reveals. Hidden faces are never added. Adjust covered wall/floor area separately to avoid counting twice. These faces apply to either mode.

Delivery & sales tax (optional)
Added only when material is purchased.
This estimate taxes materials only.

How to Calculate Tile for a Shower

Measure Only the Walls You Will Tile

This tile calculator for shower walls starts with a back wall and two side walls selected. Turn off any wall that will not receive tile. In Rectangular shower mode, the back wall uses shower width × tiled wall height; each side uses shower depth × that same height. A 5 ft back wall and one 3 ft side at 8 ft high cover 64 ft², rather than a four-wall perimeter. The open front is never added, so do not subtract it or an entry door again.

Enter the actual height from the bottom of the tiled wall to the top of the tile. Rectangular mode uses one height for all selected walls and the same depth for both sides. For unequal wall widths, different heights, partial walls or partitions, select Custom surfaces and add one row per tiled face. Each row accepts feet plus inches or meters plus centimeters, or a directly measured area. Only the active mode’s surfaces and attached openings, niches and accents are included; additional faces apply to either mode.

Need Help With the Measurements?

Follow our guide to calculating tile for a shower for a wall-by-wall example, niche measurements, and whole-box ordering.

Tub Surround Tile Calculator Measurements

Use Custom surfaces for a tub surround. Measure each wall’s actual width and the tiled height from the tub’s upper rim to the top edge of the tile. Do not include the tub bottom, the area below its rim or surfaces hidden beneath it. Add a floor row only if a separate floor will receive tile.

Using the Walk-in Shower Tile Calculator

Select the walls that are present and tiled; add both exposed sides of a partition as separate custom faces when appropriate. Glass contributes no tile area. Use the rectangular floor only when its width and depth describe the tiled footprint. Other shapes need measured areas or nonoverlapping rectangular custom surfaces. The tool does not automatically interpret every walk-in layout.

Using the Shower Floor Tile Calculator

Keep “Include shower floor” selected and assign the floor its own product record when its tile differs from the walls. Set that product’s dimensions or box coverage, allowance, packaging and price independently. For a floor-only estimate, turn off the walls and ceiling. Unused product records do not need coverage or dimensions unless you explicitly request spare boxes for them.

The rectangular floor is width × depth in plan, without a slope adjustment. For an already measured actual surface area, use a custom row with Measured area. For mosaic, a purchase piece is a whole sheet, not one small chip. Enter whole-sheet dimensions and sheets per box, or use the exact manufacturer’s box coverage. Different wall tiles and floor sheets remain separate quantities, even though their areas can be added for reference.

Openings, Niches and Exposed Edges

Subtract only an untiled area already included in a selected surface. “Adjust covered wall / floor area” accepts measured deductions, such as a footprint hidden by a bench. Use “Untiled openings” for an uncovered opening on an included wall. Do not enter the same deduction twice; deductions cannot exceed their parent surface. The calculator has no coordinates and cannot detect overlapping openings or accents.

A tiled niche is not an empty hole. Its opening is removed from the parent wall, then its selected interior faces are added: back = width × height; two sides = 2 × depth × height; top and bottom = 2 × depth × width. A 1 × 2 ft niche, 4 in deep, removes 2 ft² and adds 4 ft² if all five interior faces receive tile. Choose the products for the back and inside edges separately. A niche needs a parent wall entered with dimensions so its fit can be checked.

Use the additional tiled faces section for exposed bench tops, fronts and sides, curb faces, shelf faces and window reveals. Add only faces that receive tile, and deduct any covered parent-wall or floor area separately. An accent replaces its area within a parent wall; it does not enlarge that wall.

Shower Square Footage and Tile Orders

Calculate shower tile square footage from the selected surfaces before converting area into an order. The combined net area is a reference total. Each product has its own net area, required area with allowance, stock deduction and rounded purchase. Count each exposed face once; niche backs and bench footprints already entered in their designated settings must not be added again.

The shower wall tile calculator groups surfaces assigned to the same product before rounding. Separate records stay separate, even with matching dimensions. Net area × (1 + allowance ÷ 100) gives required coverage. Usable matching stock reduces the remaining purchase; whole boxes or pieces are rounded up afterward. Extra coverage caused by box rounding is packaging surplus beyond the planned allowance, not a second percentage of waste.

Tile Dimensions, Coverage and Joints

With Tile/sheet size, enter actual physical dimensions, not a nominal size or a module that already includes a joint. Piece area = width × length ÷ 144 when dimensions are in inches. The unrounded required coverage is divided by piece area; only then is the count rounded up to whole pieces or sheets and, if selected, whole boxes. In metric mode, tile dimensions use millimeters and surface area uses square meters.

No separate grout-joint width is included. Manufacturer box coverage takes priority when supplied, including through the override in dimension mode. It is used as given, without adding joints again. This mode reports boxes and purchased coverage; it does not infer a piece count from dimensions that the coverage has overridden.

Choose an allowance for your pattern, tile format, corners, niches, cuts and possible damage. The form’s starting percentages are editable planning assumptions, not a rule for every shower. Extra spare boxes are a separate optional order. Area-based quantities are not a cutting plan and cannot guarantee enough usable pieces for every layout.

How Much Tile Do I Need for a Shower?

Consider a 5 ft back wall, two 3 ft side walls and an 8 ft tiled height, with no openings or extra faces. Walls total (5 + 3 + 3) × 8 = 88 ft². A separate 5 × 3 ft floor is 15 ft². Assume 10% allowance for each product, no stock or spare boxes, and the illustrative packaging below. Change the floor allowance from its initial 15% to 10% to reproduce this example.

How Many Tiles Do I Need for a Shower with These Products?

  • Wall tile: 88 × 1.10 = 96.8 ft² required. A tile with 12 × 24 in calculated coverage covers 2 ft²: 96.8 ÷ 2 = 48.4, rounded up to 49 tiles. At 8 tiles per box, buy 7 boxes containing 56 tiles, covering 112 ft².
  • Floor mosaic: 15 × 1.10 = 16.5 ft² required. At an assumed 1 ft² per whole sheet, 16.5 sheets rounds up to 17 sheets. At 10 sheets per box, buy 2 boxes containing 20 sheets, covering 20 ft².

These coverage and pack sizes are hypothetical product inputs, with no separate joint correction. They are not standards for all tiles or sheets. The wall order has 15.2 ft² beyond its required coverage; the floor order has 3.5 ft². Keep the 56 tiles and 20 sheets on separate shopping-list lines.

Before You Place the Order

Confirm the final tiled heights and faces, nonoverlapping deductions, exact SKU and finish, actual piece dimensions or labeled coverage, pack count, allowance and usable matching stock. Check the proposed cuts against the available pieces before buying. The shower tile estimator can price the actual whole boxes or pieces: enter a price per box, per piece or per area as offered for the selected method. An area price multiplies purchased coverage. Tax applies to materials only; delivery is added only if something is purchased. A blank price means unknown, while 0 means a confirmed zero.

This estimate covers finishing-material quantities. It does not determine tile suitability, waterproofing, slopes, substrate construction or shower-system compatibility. Follow the requirements of your chosen system and manufacturer. Labor, demolition, mortar, grout, trims and plumbing are excluded from the tile purchase total.

For other room surfaces, use the Tile Calculator. Once you know your selected tile and joint details, the Grout Calculator can help estimate grout separately.

Frequently Asked Questions

Can I use a known area instead of shower dimensions?

Yes. Select Custom surfaces, choose Measured area and enter each product’s surface area in ft² or m² as labeled. Use separate rows for different products. Switch that parent wall to dimensions if you need to attach a niche or opening and check its size.

Why does a box order exceed the number of tiles required?

You buy whole packs. The example needs 49 wall tiles, but 7 boxes of 8 contain 56. That difference comes from packaging. The result shows required coverage, whole pieces, boxes and purchased coverage separately when using dimensions.

What if I already have matching tile?

Open the product’s stock settings. Enter usable area for manufacturer coverage or whole matching pieces for dimension-based ordering. Stock is deducted before purchase rounding. An explicit request for spare boxes still adds those boxes even when stock covers the required area.

Can walls and floor share one order?

Only if they use the identical product and ordering assumptions. Assign that product to both surfaces to combine their areas before rounding. Keep different SKUs, packaging or allowances in separate records.

What happens when I change an input or use Reset?

An edit hides the old result; select Calculate again to update it. Reset removes added products and faces, clears prices and features, closes optional settings and restores the initial three walls, floor, measurements and sample coverage values. Replace those samples with your product data.