Skip to content

Tile Calculator

Estimate whole tiles or boxes for one product across floors and walls, with an allowance, purchased coverage and optional material costs.

Enter floor length and width, wall height and width, or a known net area in square feet. Then enter actual tile dimensions in inches or the manufacturer’s coverage per box. Choose an allowance for cuts and, if buying boxes, provide the pack count. The Tile Calculator shows net area, the allowance-adjusted requirement, whole tiles or boxes, purchased coverage and optional material costs from your own prices. Combine surfaces only when they use the same tile product, size and color.

Plan your tile purchase

1. Surfaces to cover
Measuring guide & tile moduleWidth (ft)Length /height(ft)SurfaceDeductTileTile + jointOne moduleJoint

Illustration only, not a layout. For floors, use length and width; for walls, use height and width. Split an irregular outline into nonoverlapping sections or add their areas yourself. Module area = (tile length + joint) × (tile width + joint) ÷ 144 sq ft.

2. Tile & purchase
Use the actual product size, not just its nominal name.
Joint width & module limits
0 is the calculation default, not an installation recommendation.

This repeating-module estimate does not plan rows, cuts or reuse of offcuts. A joint does not guarantee a smaller order. Check the layout and choose a suitable allowance.

0–100%. Applied before rounding. No hidden reserve; consider cuts, pattern, edges and future repairs.
3. Prices & other material costs (optional)

USD. Blank means unknown; an entered 0 is a known zero. Additional costs are total amounts for this project, not rates per square foot.

Adhesive and grout quantities depend on the product and application. Enter their costs yourself. No automatic labor, tax or markup.

How Many Tiles Do I Need?

Start with the area you will cover, then account for your product’s coverage, the cutting allowance and its selling format. This tile quantity calculator pools up to ten surfaces before rounding the order. A shared product can cover several rooms or walls; different products need separate calculations, even if they are part of one bathroom.

How to Calculate Tiles Needed

Measure Floors in Square Feet

The tile square footage calculator multiplies length by width for each rectangle. Measure only the floor that will receive tile. Split an L-shaped room into nonoverlapping rectangles and add a surface for each, or add their areas yourself and select “I know the area.” Check the floor tile estimator results against a layout: area alone does not reveal the number or position of edge cuts.

When using the tile calculator for a floor with cabinets or an island, confirm which sections will remain untiled before subtracting them. Open “Subtract uncovered areas” to enter each rectangular deduction’s width, height and whole-number quantity. Do not subtract overlapping areas twice. Deductions may equal the surface area, giving a zero purchase, but cannot exceed it.

Measure Height and Width with the Wall Tile Calculator

Enter the tiled height in “Length / wall height” and the horizontal width in “Width.” All surface dimensions use feet: an 18-inch backsplash is 1.5 ft high. Add returns or niche faces as separate surfaces where needed. Deduct a door or window only if that area will remain uncovered.

For a bathroom tile calculator estimate, measure the floor, each wall and any other tiled face separately. The tile calculator for walls can pool these areas with a floor only when they share the exact same product. Otherwise, reset and calculate each product’s order separately. For shower-specific surfaces, use the Shower Tile Calculator. Neither area estimate determines waterproofing, shower slopes or the shower’s construction.

Start from a Known Area

To use the tile calculator with square feet you already measured, select “I know the area” and enter the net area after deductions. Saved rectangle dimensions and deductions are ignored in this mode. To convert square feet to a tile count, the calculator also needs the selected product’s dimensions or labeled box coverage.

Choose the Right Coverage Basis

The tile coverage calculator offers two methods. Use Tile dimensions for identical rectangular tiles, or Manufacturer box coverage for a product sold by labeled coverage. Choose one basis for the whole calculation.

  • Dimensions: enter actual physical length and width in inches. A nominal “12-inch” tile may have different actual dimensions. With a zero joint setting, tile area = length × width ÷ 144 ft².
  • Optional joint: module area = (tile length + joint width) × (tile width + joint width) ÷ 144 ft². An 11.75 × 11.75 in tile with a 0.25 in joint has a 1 ft² repeating module. If your dimensions already describe a module, leave the separate joint at 0 to avoid counting it twice.
  • Labeled coverage: enter coverage per box for the exact product. Tile dimensions, joint width and tiles per box are ignored, so no extra joint adjustment is added. This method reports boxes and coverage, without inventing an individual piece count.

The joint setting starts at 0 for calculation purposes; it is not installation advice. A repeating module approximates coverage across an area and does not count exact perimeter joints, cuts or usable offcuts. A larger joint does not guarantee a smaller safe order. Confirm the layout and joint recommendations for your product.

Whether you need a ceramic tile calculator or a porcelain tile calculator, quantity depends on the product’s actual dimensions or stated coverage. Material type alone does not establish coverage. The tool does not assess suitability for floors, walls, wet areas or outdoor use. For mosaic sheets and mixed-size sets, use labeled box coverage rather than treating a whole set as one arbitrarily sized tile.

Choose an Allowance with the Tile Waste Calculator

The allowance starts at 0%; you can enter 0–100%. Choose it for your pattern, room shape, edge cuts, breakage and repair stock, with guidance from the manufacturer or installer. Ten percent in the example below is an assumption, not a universal recommendation. The tool does not optimize diagonal layouts or reuse of offcuts.

Required coverage = net area × (1 + allowance ÷ 100). In dimension mode, divide net area by module area, apply the allowance to that unrounded quantity, then round up to whole tiles. Do not round each surface or the initial tile count before adding the allowance.

Using the Tile Box Calculator

Select “Full boxes” and enter the exact number of identical tiles per box. The order rounds up from whole tiles to whole boxes. Purchased tiles = boxes × tiles per box; purchased coverage = purchased tiles × module area. This is calculated coverage, which may differ from the product’s labeled coverage convention. Select manufacturer coverage instead when that label is your ordering basis.

In manufacturer mode, boxes = required coverage ÷ coverage per box, rounded up. The results separate net area, required coverage with allowance and purchased coverage. Extra tiles or coverage from buying full boxes are packaging surplus beyond the chosen allowance, not a second waste percentage.

Floor Tile Calculator Example: 10 × 12 ft

Assume a 120 ft² floor, identical tiles with a calculated 12 × 12 in coverage and no separate joint adjustment. Choose a 10% allowance and boxes containing 10 tiles:

  • Net area: 10 × 12 = 120 ft². Each tile covers 1 ft², so the unrounded count before allowance is 120.
  • Required coverage: 120 × 1.10 = 132 ft², requiring 132 whole tiles.
  • Full boxes: 132 ÷ 10 = 13.2, rounded up to 14 boxes.
  • Purchased quantity: 140 tiles with calculated coverage of 140 ft². The 8 tiles above 132 come from box rounding.
  • At an illustrative $30 per box, tile material costs $420. Labor and other expenses are excluded.

For a fractional case, 20 ft² with 18 × 18 in tiles and no joint adjustment gives 2.25 ft² per tile. With 10% allowance: 20 ÷ 2.25 × 1.10 = 9.777… → 10 tiles before box rounding. Rounding 8.888… up to 9 before applying the allowance would give the wrong order at some boundaries.

Using the Tile Cost Calculator

Open optional prices and enter price per tile for individual purchases or price per box for either box mode. The material estimate uses the purchased count after rounding. Only the price field for the selected purchase format applies. Area-based pricing is not supported; use your supplier’s price for the selected selling unit.

Adhesive, grout, other materials and delivery are optional project totals, added once. Enter each expense in only one category. Leave an unknown price blank; an entered 0 means a known zero. Missing prices do not prevent a quantity calculation, and the cost label identifies whether the subtotal covers tile material, other entered costs or all entered categories.

All prices are your own USD inputs. The total does not automatically include labor, tax, surface preparation, waterproofing, trim or tools. Keep these expenses in a separate budget unless included once in an appropriate entered total. To estimate a separate grout purchase, use the Grout Calculator; this tool accepts a grout cost without calculating its quantity.

Frequently Asked Questions

Can the calculator tell me how many tiles I need for an irregular room?

Yes, if you first divide the tiled area into nonoverlapping rectangles or supply its measured net area. Curves, mixed patterns and complex cuts need a separate layout check. The estimate cannot guarantee that the order will cover every cut.

Does the floor tile cost calculator include installation?

No installation charge is calculated. The displayed amount is tile material plus only the additional totals you enter. Request a separate installation quote and check which materials or services it already includes before combining budgets.

Can I enter meters or centimeters?

The form accepts surface dimensions in feet, area in square feet, and tile or joint dimensions in inches. Convert first: 1 ft = 12 in; 1 m = 3.28084 ft; 1 m² ≈ 10.7639 ft². Do not type a metric value directly into a field labeled ft or in.

Why did my result disappear after an edit?

Changing an input clears the old shopping list. Select Calculate again to see the updated order. Reset clears measurements and prices, removes added surfaces and deductions, closes optional settings and restores the initial modes and zero allowance.