Use this board foot calculator to total a single board or a mixed lumber list. Enter the dimensions used for each row, choose whether they represent supplier tally or actual measurements, and add your own prices if you want a cost estimate.
Mixed dimension bases. Review each row’s Dimension basis to use a consistent tally if needed. This total is not a homogeneous supplier tally.
Lumber list
| Board / basis | BF per piece | Row BF | Linear ft / cost |
|---|
Full lumber summary
What is a board foot?
A board foot (BF) measures lumber volume. One BF is 144 cubic inches: a piece 1 inch thick, 12 inches wide and 12 inches long. The same volume can have many different shapes. Board feet do not describe the number of boards or how much surface they cover.
1 BF = 1/12 ft³ = 0.002359737216 m³. The volume equivalent shown here is based on your selected dimensions. When those dimensions are nominal, it is not the measured physical volume of the delivered, dressed boards.
How to calculate board feet
- Choose the dimension basis for each board: supplier tally or actual measured.
- Enter thickness and width in inches or millimeters, length in your chosen unit, and the quantity of identical pieces.
- Add another row for a different size, price or basis. Select Calculate to get the total.
Board foot formula: BF per piece = thickness (in) × width (in) × length (ft) ÷ 12. Multiply by quantity to find row BF, then add the rows without rounding their intermediate values.
If all dimensions are in inches, BF per piece = thickness × width × length ÷ 144. The calculator normalizes dimensions using 1 in = 25.4 mm and 1 ft = 0.3048 m. For feet and inches, enter each part in its own field; 7 ft + 12 in represents 8 ft.
Nominal vs. actual dimensions
Nominal / supplier tally dimensions means the sizes used to account for your material. Enter the supplier’s tally thickness, width and length. Actual measured dimensions means the dimensions you have measured on the boards. Changing the basis label does not change any entered size.
For example, a nominal 2 × 4 × 8 ft calculation gives 2 × 4 × 8 ÷ 12 = 5.333333333… BF. A dry, dressed softwood board measured at 1.5 × 3.5 in and 8 ft gives 3.5 BF. Those sizes describe a common product category, not a promise that every board called a 2×4 measures the same. Measure the product and check the supplier’s specification.
Suppliers may apply their own tally rounding, minimum thickness or accounting rules. This lumber board foot calculator applies the dimensions entered without silently copying those rules. Use a consistent basis across rows when comparing a supplier quote; a mixed list is clearly flagged in the results.
Hardwood thickness: 4/4, 5/4, and 8/4
Hardwood quarter notation expresses nominal thickness in quarter inches. 4/4 = 1 in, 5/4 = 1.25 in, 6/4 = 1.5 in, 8/4 = 2 in, 10/4 = 2.5 in and 12/4 = 3 in. It identifies the starting nominal thickness, not the final thickness after surfacing.
The quick buttons explicitly enter that nominal thickness and select the nominal basis. To calculate measured volume, select Actual measured dimensions and enter the thickness you measured. Inch fields also accept decimals, simple fractions such as 3/4, and mixed fractions with a space such as 1 1/2. An ambiguous string such as 1-1/2 or 4/4 extra is rejected rather than partly read.
Pricing by BF, MBF, piece, and linear foot
Use your supplier’s price in USD. Each row can have a different rate and price unit. Leave price blank to calculate lumber quantities only; entering 0 is a valid zero rate.
- Per BF: row BF × price.
- Per MBF: row BF ÷ 1,000 × price. MBF here means 1,000 board feet, not one million.
- Per piece: quantity × price.
- Per linear foot: length in feet × quantity × price.
- Per linear meter: length in meters × quantity × price.
BF and MBF prices apply to the selected dimension basis. A linear price depends on total length, not thickness or width. This lumber cost calculator shows a Partial priced subtotal if any row is unpriced. Optional sales tax equals the priced material subtotal × entered rate ÷ 100; estimate total adds that tax and the entered delivery charge. Tax is applied to material only. On a partial estimate, the total covers only the known priced portion plus delivery.
Worked example: ten 1 × 6 boards
Using nominal tally dimensions of 1 in × 6 in × 8 ft, each board is 1 × 6 × 8 ÷ 12 = 4 BF. Ten boards total 40 BF and 80 linear ft. At an entered $6/BF, material costs $240. With 8% material-only sales tax and $50 delivery, tax is $19.20 and the estimate total is $309.20.
The metric dimensions 25.4 mm × 152.4 mm × 2.4384 m describe the same size and produce 4 BF per piece. Ten boards priced at $1,500/MBF cost $60; priced at $15/piece they cost $150; priced at $2/linear ft they cost $160. These are separate example price choices, not market prices or charges to combine.
Planning allowance and limitations
Allowance is off by default. If enabled, planning BF = calculated BF × (1 + allowance ÷ 100). A 64 BF list with 10% allowance has 6.4 additional BF and 70.4 planning BF. Calculated volume and row quantities remain unchanged.
The separate planning cost covers only rows priced per BF or MBF, using those same rates before tax and delivery. Piece and linear rates are unchanged because a volume percentage does not specify the extra real boards to buy. No cutting optimization, kerf allowance or purchase count is implied.
This tool is for rectangular lumber. It does not estimate board yield from logs, Doyle, Scribner or International log rules, standing timber value, structural capacity, exact cutting layouts, or weight without material and moisture data. Labor, drying, planing and cutting charges are not added automatically.
Frequently asked questions
How many cubic inches are in a board foot?
Exactly 144 cubic inches. A 1 in × 12 in × 12 in board is one BF.
How do I calculate several boards?
Use quantity for identical pieces and add rows for different dimensions or prices. The board feet calculator multiplies each per-piece result by its quantity and sums all rows using unrounded values.
What does 4/4 mean?
Four quarter inches, or 1 inch nominal hardwood thickness. It does not mean 4 inches and does not guarantee a finished thickness after planing.
Which dimensions should I use?
For a supplier quote, use the dimensions and tally basis specified by that supplier. For measured rectangular volume, enter measured thickness, width and length and choose the measured basis. The calculator never silently changes your dimensions.
How are BF different from linear feet?
BF measures volume; linear feet measures length. A thicker or wider board has more BF for the same linear length.
What does MBF mean?
In this calculator’s price selector, MBF means one thousand board feet. A $1,500/MBF rate is $1.50/BF.
Can I use metric dimensions?
Yes. Select millimeters for thickness or width and meters for length. Results remain in BF with both US and metric volume and length equivalents. Changing units preserves the physical dimensions.
Does this tool calculate log volume?
No. Log scale estimates require a separate log rule and describe potential sawn yield. Enter dimensions of rectangular lumber here.
Technical notes and PDF documents
Methodology checked . The tool uses geometric volume and user-entered prices. Display rounding is separate from calculation; it applies no minimum tally thickness, per-board whole-BF rounding or universal billing rule.
- UNH Cooperative Extension: New Hampshire Native Lumber Law self-study booklet, printed pages 3–4: lumber measurement formula, linear length and a dry dressed 2×4 example. Its example tally rounding is not applied here.
- American Hardwood Export Council: Grading sawn lumber — Measurement: rough hardwood quarter thickness and BF/MBF notation. Its grading and export tally rounding procedures are not applied by this geometric calculator.
- NIST / U.S. Department of Commerce: PS 20-25 American Softwood Lumber Standard: softwood nominal and dressed size categories; not a universal hardwood or supplier billing rule.
- NIST SP 811: Conversion factors: international foot and inch conversions. The exact metric BF factor follows from 144 cubic inches; rounded trade conversions are not substituted.
Related calculators
For general volume in cubic yards, use the Cubic Yard Calculator. For surface area without thickness, use the Square Footage Calculator. Area alone cannot be converted to BF without a thickness.
