Skip to content

Siding Calculator

Use this siding calculator to plan a whole-house replacement, clad an addition, or order material for one wall. Enter your measurements to get the area, box count from the label coverage, and siding cost from your supplier’s price.

Siding area

Measure a wall up to the base of its gable. Add the triangle as a separate section. Use decimal feet or inches for each measurement.

Allowance, boxes, and price
Enter your allowance for cuts. Use 0 if you don’t need one.
Optional. Use the usable coverage on the box label. Required if you enter a price per box.
Optional. Enter your supplier’s price for the selected unit.

Calculate each profile, color, or material separately with its own allowance and box coverage.

Siding Square Footage Calculator: How to Measure

Sketch the exterior and label the walls so you can keep track of what you’ve measured. Start with the sections that will use the same siding. For an addition, measure the new exterior faces you plan to cover.

  1. Measure each rectangular wall from edge to edge and from the bottom of the siding to the top of the rectangle. If there’s a gable, stop at the line where the roof starts to slope.
  2. Enter the gable as a separate triangle. Use the width across its base and the vertical height from the base to the peak. The area is half the base times the vertical height.
  3. In each section, add the windows and doors that will stay uncovered. Measure the width and height of the area the siding will leave open. Enter one row for each size and use the quantity field for matching openings in that section.

If you already have the net square footage, choose Enter known area. Use the area after subtracting openings and before adding any allowance for cuts. The Square Footage Calculator can help work out individual shapes when you’re totaling the measurements yourself.

From Net Area to a Siding Order

The siding estimator subtracts openings from the total wall and gable area to get the net area. The purchase area adds your cutting allowance to that net area. Enter the percentage that suits your layout, or use 0% if no allowance is needed.

For the box count, enter the usable coverage printed on the package. The tool rounds the order up to the next whole box when needed. The boxes may cover more than your purchase area because suppliers sell them in whole units.

Run this siding estimate calculator once for each product. If you use a different profile, color, or material on the gables, give it a separate calculation with its own allowance and box coverage.

To estimate the siding cost, enter the supplier’s price per box or per square foot. When you’re buying boxes, the square-foot rate applies to their full coverage. If you leave box coverage blank and price by square foot, the rate applies to the purchase area. Leave price blank if you’re only estimating quantities.

Compare the siding figure with the material line on a contractor’s quote. Check separate charges for installation, removal and disposal, trim and starter strips, fasteners, house wrap, repairs, delivery, and tax.

Worked Example: A Wall and Gable

A 30 × 10 ft wall has two 3 × 4 ft windows and a 3 × 7 ft door. Above it is a triangular gable with a 30 ft base and a 6 ft vertical height.

  1. The wall covers 300 sq ft and the gable covers 90 sq ft, for 390 sq ft before deductions.
  2. The windows take up 24 sq ft and the door takes up 21 sq ft. Subtract 45 sq ft to get 345 sq ft of net siding area.
  3. A 10% cutting allowance adds 34.5 sq ft, bringing the purchase area to 379.5 sq ft.
  4. At 100 sq ft per box, order 4 boxes for 400 sq ft of coverage.
  5. At $180 per box, the siding costs $720.00. At $1.80 per sq ft, the same 400 sq ft also costs $720.00.

Frequently Asked Questions

How Many Boxes of Siding Do I Need?

Divide your purchase area by the usable coverage per box. If the result is a whole number, order that many boxes. If there’s any remainder, round up to the next box.

Can I Use This as a Vinyl Siding Material Calculator?

Yes. As a vinyl siding estimator, it uses the square feet of installed coverage listed for your panel profile. Enter that coverage for the product you’re ordering and price accessories separately.

What If I’m Using Two Colors?

Measure the area for each color separately. Calculate and round the boxes for one color at a time so the leftover coverage from one color doesn’t count toward the other.